// led wired + to pin 12, resistor to positive +5v
#include <Servo.h> 

#define outPin 11

int val;
Servo drapeau;

void setup()
{
 pinMode(outPin, OUTPUT); // sets the digital pin as output
 Serial.begin(9600);
 Serial.flush();
 drapeau.attach(9); // servo sur la pin 9
 drapeau.write(0);
}

void loop()
{
 // Read from serial port 
 if (Serial.available()) {
   val = Serial.read();
   delay(1);
   

   if (val == 'm')
   {
     digitalWrite(outPin, HIGH);
     drapeau.write(88);
   }

   else if (val == 'n')
   {
     digitalWrite(outPin, LOW);
     drapeau.write(0);
     
   }
 }

  
}